swiss short wave radio station
HB9AWJ
qth : Zurich locator
: JN47GH operator : Jurg licensed since
1972
ITU Zone : 28 CQ zone : 14
qth locator Italy (temporarily) : JN53HH (IK5/HB9AWJ)
special intention and interests: low loss transmission regarding antenna coupler and feed line, calculating optimal feed line length and choosing the best coupler system
(see loss calculations for couplers and feed lines, different publications by DL3LH (on request directly from DL3LH: https://gutachten-emvu.jimdo.com/kontakt))
technical data / working conditions (Zurich) :
transmitting / antenna systems :
tx/rx : FT-950 and "Airspy HF+ Discovery" as Panadapter with SDR Console, 100 W
qrp: SDR ANAN-10E, 10 - 15 W
ant / coupler: 3.5 MHz / 5.3515 MHz / 7.1 MHz : NVIS-dipole 2 x 17m, height 3 to 8 meters, 600 Ω symmetric feed line, low loss symmetric Cs-Lp-network
(with no balun; according to DL3LH)
ant / coupler: 14.0 MHz / 18.1 MHz / 21.0 MHz / 28.0 MHz : monoband end fed half-wave vertical, ʎ/4 - 450 Ω double line for impedance transformation (J-Pole),
feeding point 11 meters above ground
technical data / working conditions (Italy) :
tx/rx : qrp: SDR ANAN-10E, 10 - 15 W ; occasionally Hardrock 50 power amplifier, 50 W
ant / coupler: (all band) 2 x 20 m dipol, height 10 m to 14 m above ground, 450 Ohm symmetric feed line, low loss symmetric Cs-Lp-network
(with no balun, according to DL3LH)
qrv (Zurich) :
3.5 - 3.8 MHz: 100 W input into symmetric Cs-Lp-coupler ; qrp 10 W
5.3515 - 5.3665 MHz : 15 W input into symmetric Cs-Lp-coupler (approximately 13 W EIRP)
7.0 - 7.2 MHz: 100 W input into symmetric Cs-Lp-coupler ; qrp 10 W
20m, 17m, 15m, 10m (currently not qrv) : 100 W input into the quarter wave stub of the end fed half-wave antenna ; qrp 10 W
operating modes: CW / SSB
qsl : actually not available ; contact : hb9awj [at] kurzwellenstation.ch
qth locator Italy (temporarily) : JN53HH (IK5/HB9AWJ)
special intention and interests: low loss transmission regarding antenna coupler and feed line, calculating optimal feed line length and choosing the best coupler system
(see loss calculations for couplers and feed lines, different publications by DL3LH (on request directly from DL3LH: https://gutachten-emvu.jimdo.com/kontakt))
technical data / working conditions (Zurich) :
transmitting / antenna systems :
tx/rx : FT-950 and "Airspy HF+ Discovery" as Panadapter with SDR Console, 100 W
qrp: SDR ANAN-10E, 10 - 15 W
ant / coupler: 3.5 MHz / 5.3515 MHz / 7.1 MHz : NVIS-dipole 2 x 17m, height 3 to 8 meters, 600 Ω symmetric feed line, low loss symmetric Cs-Lp-network
(with no balun; according to DL3LH)
ant / coupler: 14.0 MHz / 18.1 MHz / 21.0 MHz / 28.0 MHz : monoband end fed half-wave vertical, ʎ/4 - 450 Ω double line for impedance transformation (J-Pole),
feeding point 11 meters above ground
technical data / working conditions (Italy) :
tx/rx : qrp: SDR ANAN-10E, 10 - 15 W ; occasionally Hardrock 50 power amplifier, 50 W
ant / coupler: (all band) 2 x 20 m dipol, height 10 m to 14 m above ground, 450 Ohm symmetric feed line, low loss symmetric Cs-Lp-network
(with no balun, according to DL3LH)
qrv (Zurich) :
3.5 - 3.8 MHz: 100 W input into symmetric Cs-Lp-coupler ; qrp 10 W
5.3515 - 5.3665 MHz : 15 W input into symmetric Cs-Lp-coupler (approximately 13 W EIRP)
7.0 - 7.2 MHz: 100 W input into symmetric Cs-Lp-coupler ; qrp 10 W
20m, 17m, 15m, 10m (currently not qrv) : 100 W input into the quarter wave stub of the end fed half-wave antenna ; qrp 10 W
operating modes: CW / SSB
qsl : actually not available ; contact : hb9awj [at] kurzwellenstation.ch